Double Glazed Window Repair
It is worth looking into the warranty included with most double-glazed windows. upvc repairs covers issues with window hardware, such as hinges and locking mechanisms in the first ten years.
The mist that forms between the glass windows can be caused by a break in the seal, and it's something that requires immediate repair to prevent damp or mould growing in your home.
Condensation Between the Windows
If you notice condensation forming between your windows, it is an indication that the seal holding in the gas insulating the windows has failed. This is a serious issue that needs to be addressed immediately, especially during the winter months when humidity levels are at their highest. It could also lead to damage to the sills, sealant, or even mould or mildew.
Ideally double-glazed windows shouldn't experience condensation between the panes. However, it's not uncommon for high humidity or an extremely cold snap to trigger this problem. This problem is usually resolvable without the need to replace the entire window. A professional can drill tiny holes in the glass and spray the inside of the window with a special cleaning solution. The water is then drained from the window. Additionally, an anti-fogger is fitted to prevent future moisture buildup.
Condensation between the windows can be due to air leakage or other factors outside the window. If this is the scenario, it's likely to take longer for the moisture to accumulate inside the window, since the air will need to be sufficiently warm for the water molecules to evaporate. In these situations it is best to replace double-glazed windows than trying to repair the sealed units.
Double-glazed glass windows are composed of two or more pieces of tempered, insulated glass that are joined by a metal framework. The gap between the two of the windows is filled with a non-toxic gas for insulation like argon or krypton, and then sealed. The seal prevents the gas that is insulating from escape, and it also stops air and moisture from entering into the gap.
As windows get older, the seals weaken and allow moisture to leak into the gap between the glass panes. When seals fail, it is important to be aware of this since it indicates that the double glazing isn't performing as well as before. This could result in lower energy efficiency, increased heating costs, damage to the property, and the risk of condensation forming between the windows.
Mist
If you see condensation on the outside of your windows, this is perfectly normal and means that your double glazing is functioning properly and retaining the heat in your home. The condensation happens because the air outside is hotter than the glass, and reaches the dew point of the window prior to the air inside. Double glazing of top quality is an excellent method to achieve this.
If the condensation is on the inside of your window then it could be a sign of a ventilation issue in your home. This is because the extra moisture isn't going anywhere and ends up on your windows, in carpets, in furniture, and in other areas within your home. The process of having this examined by an expert and ensuring that there plenty of fresh air flowing through your home will help avoid it in the future.
Another reason for mist to appear on double-glazed windows is that the seal between two glass panes is broken. This could be due to wear and tear or chemical cleaning products that are being used. If this is the case, the best option is to repair the windows as soon as you can.
Repairing your windows professionally will ensure that they are waterproof and free of condensation, fogging and misting. This is also much cheaper than replacing the windows, and you'll save money on your energy bill.
A FENSA-registered window installer can provide you with a price to repair or replace your double glazed Windows. If your windows are old and have been used for a long time you may want to think about upgrading them to A-rated energy efficient windows.
It is a good idea to retain copies of any warranties and agreements with your window installers. It can be helpful in the event that you experience any problems with your windows. You can contact your window fitters and resolve the problem. This is better than ignoring the problem which could cause more problems for your home.
Close or open without difficulty
Double-glazed windows are difficult to open and close it's not just a nuisance and can result in an increase in energy costs due to the loss of heat and draughts. It can also pose security risks, particularly when the locks aren't working correctly. It is crucial to address any problems with double glazed doors and windows as soon as you discover them.
If you've tried opening your window using one of the easiest methods, like using a screwdriver or tapping on the frame using a solid object, the issue could be more serious. The window may have shifted and requires a reset or there could be a gap in between glass and frames. In either of these scenarios, you must seek out a professional double glazing repair expert to make sure that the right repairs are done and to prevent future problems.
It's not uncommon to find UPVC window handles and lock mechanisms to become difficult to operate or get stuck particularly if they're old and worn. It is usually caused by a build-up of dirt or grease in the handle. This can be easily solved by cleaning it with a uPVC cleanser. If this doesn't work, you can try tapping the uPVC using the help of a screwdriver. Be careful not to damage either the handle or window handle mechanism.
If this does not solve the issue then the window will have to be replaced because the hinges might not be in the proper place or the locking mechanism might have been damaged. In this case you should speak to a UPVC window specialist.
David The Window Wizard specialises in all technical aspects of double-glazed window and door repair, including fixing a jammed or shut double glazing window. He has plenty of experience in converting old window mechanisms into modern. This can save you money in the replacement of the entire window. Contact us now for more information or a free estimate.
Warping
Double-glazed windows are the ideal way to cut down on energy in your home. They consist of two separate panes which have a spacer or dense gas between them. This creates a seal which keeps cold air out and warm air inside. However in time, the windows may be damaged or destroyed and require repair. Most of these repairs can be made without the need to replace the entire window.
Warping is a typical issue with double-glazed windows. This happens when the windows begin to bend or twist or bow. This can affect the structural integrity and insulation abilities of the window. Double glazed windows should be installed correctly and maintained regularly to avoid this problem.
If your double-glazed windows are beginning to swell, it's important to contact a specialist immediately to prevent the issue from becoming worse. They can inspect your windows to determine the root cause. They will make use of specific tools to correct the problem and ensure that you windows are completely sealed.
Water vapour can trigger this problem, as it can accumulate between the windows over time. It can be caused by many factors, including the weather conditions such as humidity levels, temperature and changes. To fix this problem the expert will drill a tiny hole to let the moisture out. The specialist will use a cleaner on the glass to cleanse it and then apply sealant.
In the alternative, if your windows aren't able opened or closed, this could be a sign of a broken mechanism or hinges. Before calling a professional to address the problem, it is worth lubricating these parts. This will usually resolve the issue and reduce the need for replacements. If your windows are old or do not provide the insulation you'd like to have It is generally better to replace them.